Cartridge Heater

Product Details:

We are regarded as the remarkable firm of an extensive gamut of Low Density Cartridge Heater that is renowned for its sturdy structure and high efficiency. Demanded for fluid heating and sealing applications, provided cartridge heater is manufactured by our adept professionals using quality assured material and modish machinery. This cartridge heater is obtainable in diverse specification to satisfy the diverse needs of our clients.

Product Name:

• Low Density Cartridge Heater

Description:

• Constructed in Brass & SS.
• SS or Brass sheath is used on all Low-Density cartridge heaters to provide the best combination of physical strength.
• Having variety of terminal types like Leads, Screw or Pin type.
• Also available High Density Cartridge heater

Technical Data:

• Helically wound 80/20 Nickel Chrome or Kenthal resistance wire.
• High purity Magnesium Oxide (mgo) is used to fill it.
• Can be fabricated as per requirement, in different diameters

Application:

• Molds
• Dies
• Hot plates
• Sealing
• Fluid heating
• Life sciences
• Aerospace
• Semiconductor
• Injection and Blow Molding.
• Foodservice equipment

Ordering Info.
Required:

• Inside diameter
• Length required
• Volt & Wattage Require
• Type of termination
• Drawing or photo if necessary

Additional Information:

• Item Code: CH-01

Product Details:

With the endorsement of our adept professionals, we are occupied in offering a qualitative range of Low Density Cartridge Heater that is accessible in several specifications. Offered cartridge heater is used to heat any kind of material like sugar, air, plastic pellets or oil. Our cartridge heater is manufactured by our industry-professionals using modernized technology and well-tested material in line with the set quality standards.

Features:

• Ergonomic design
• High efficiency
• Long operational life

Additional Information:

• Item Code: CH-04

Product Details:

We are an ISO 9001:2008 certified Manufacturer, Exporter and Supplier of wide range of Band Heater, Cartridge Heater, Cast in Heater, Air Heater, Immersion Heater, Strip Heater, Bobbin Heater, Infrared Heater, Air Circulation Oven, etc.

Product Details:

INTRODUCTION:

Bolt heaters are used to pre heat large, hollow holding bolts or studs. These heaters are used as an aid to tighten large bolts in heavy machinery, servicing of hydraulic presses, compressors, die blocks, steam or pressure vessels and other equipment. A high concentration of heat is needed to expand both allowing further tightening of the nut. As the bolt cools and contracts it results in the nut being drawn even tighter. Bolt heater is specifically designed to provide with close tolerance fits, watt densities of 100 watts per square inch. Which is almost 65% higher than standard cartridge or tubular heating elements can deliver. Bolt heaters provide quicker heat up time and minimum heat loss to the area surrounding the bolt.

 

Features

• Conduit box with knockouts
• Magnesium Oxide filled and swaged
• Optional SJO cord or post terminal
• Insulated wooden handle
• High Density construction
• Ground connection in box
• Lengths to 96" available

Applications

• Engine Heads
• Pressure Vessels
• Cylinders
• Die Blocks
• Turbines
• Presses
• Large Compressors
• Heavy Machinery

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: MUMBAI
• Production Capacity: 1000
• Delivery Time: 10 DAYS

Product Details:

We are ranked amongst the foremost firms, engaged in manufacturing, exporting and supplying a qualitative range of High Density Cartridge Heater. Offered cartridge heater is manufactured by our adroit professionals using the latest machines and high grade material. Highly praised for its strong design and long operational life, this cartridge heater is vastly used for injection and blow molding, food service equipment and fluid heating.

Product Name:

• High Density Cartridge heater

Description:

• High watt density permits smaller heaters to be used without sacrificing life
• expectancy. This results in up-front as well as long-term cost saving.
• SS-304 and SS-316 sheath is used on all High-Density cartridge heaters to
• provide the best combination of physical strength.
• Having variety of terminal types like Leads, Screw or Pin type.
• Application up to 820’C

Technical Data:

• Helically wound 80/20 Nickel Chrome or Kenthal resistance wire.
• High purity Magnesium Oxide (mgo) is used to fill it.
• Can be fabricated as per requirement, in different diameters
• Maximum watt density up to 50 watts/cm.

Application:

• Molds
• Dies
• Hot plates
• Sealing
• Fluid heating
• Life sciences
• Aerospace
• Semiconductor
• Injection and Blow Molding.
• Foodservice equipment

Ordering Info.
Required:

• Inside diameter
• Length required
• Volt & Wattage Require
• Type of termination
• Drawing or photo if necessary

Additional Information:

• Item Code: CH-02

Product Details:

By keeping track of current market development, we are presenting an outstanding range of Ceramic Strip Heater. Mainly used for process air heating in baking ovens, cabinet warming and many more, offered strip heater is manufactured using high grade ceramic and modern technology. Clients can purchase this strip heater from us in numerous specifications as per the need of the client.

Features:

• Durability
• Simple installation
• Resistant to corrosion

Additional Information:

• Item Code: CH-03

Product Details:

We are an ISO 9001:2008 certified Manufacturer, Exporter and Supplier of wide range of Band Heater, Cartridge Heater, Cast in Heater, Air Heater, Immersion Heater, Strip Heater, Bobbin Heater, Infrared Heater, Air Circulation Oven, etc.

Additional Information:

• Item Code: CH-06